AirSeal System

overview

Product Overview

airseal-ifs-intelligent-flow-system-only_s1

Part of CONMED’s AirSeal® System, the AirSeal iFS is the world’s first “3 in 1” insufflation management system and features unmatched capabilities in providing a stable pneumoperitoneum, constant smoke evacuation*, and valve-free access.

AirSeal Mode – Use with Tri-Lumen Filtered Tube Set (ASM-EVAC)

  • Optimizes Gas Flow to Provide Stable Pneumoperitoneum
  • Facilitates Smoke Evacuation and Filtration with 0.01µ ULPA Filter
  • Use with AirSeal Access Port, provides valve free access

Smoke Evacuation Mode – Use with Bifurcated, Dual-Lumen Filtered Tube Set (SEM-EVAC)

  • Provides High Flow Insufflation
  • Facilitates Smoke Evacuation and Filtration with 0.01µ ULPA Filter

Standard Insufflation Mode – Use with Single-Lumen Filtered Tube Set (SIM-TUB)

  • Provides High Flow Insufflation

Low Pressure Laparoscopy

Data shows that low pressure laparoscopy was previously difficult to accomplish due to the limitations associated with conventional insufflation. AirSeal System’s unique ability to maintain pneumoperitoneum and constantly remove smoke enables surgeons to operate at lower pressure without compromising exposure.

By providing stable pneumoperitoneum, constant smoke evacuation, and valve-free access to the abdominal cavity, the AirSeal System has been demonstrated to reduce procedural time, resulting in increased operating efficiency.

documentation

Documentation

overview

Product Overview

airseal-access-ports_pp_s1

Part of CONMED’s AirSeal® System, AirSeal® Access Ports provide:

  • Valve-Free Access to Abdominal Cavity
  • Intact Specimen Removal
  • Unimpeded Introduction and Removal of Clips, Needles, Sutures and Mesh

Unlike standard trocars, Access Ports feature a valve-less trocar design that gives the additional benefits of no noticeable friction as instruments are placed through the cannula, no mechanical structure to impede the removal of material, and nothing to smudge a laparoscope during reinsertion. They also feature a double-walled cannula, which enables the system to deliver CO2 through 4 nares in the distal tip, unobstructed by instruments inside the cannula.

documentation

Documentation

AirSeal® Filtered Tube Sets

overview

Product Overview

airseal-filtered-tube-sets_pp_s1

The AirSeal iFS is capable of operating in three distinct modes, each of which uses a specific filtered tube set to maximize system performance.

AirSeal Mode: Tri-Lumen Filtered Tube Set (ASM-EVAC)

  • Must be used with an AirSeal Access Port
  • 3 Lumens

-Creation and Maintenance of Pneumo
-Smoke Evacuation
-Continuous Gas Delivery

  • 0.01 Micron Filter
  • Ships with a single lumen adapter to facilitate use with a Veress needle or conventional trocar

Smoke Evacuation Mode: Dual-Lumen (Bifurcated) Smoke Evac Filtered Tube Set (SEM-EVAC)

  • Used with 2 conventional trocars
  • 2 Lumens

-High Flow insufflation
-Smoke Evacuation

  • 0.01 Micron Filter

Standard Insufflation Mode: Single Lumen Filtered Tube Set (SIM-TUB)

  • Used with any insufflation system
  • Single Lumen
  • High Flow insufflation
  • 0.027 Micron Filter
documentation

Documentation